Size 10 E-4 Wireline Pressure Setting Assembly - REFURBISHED

$4,372.50
In stock
SKU
H4370210E4RFB
  • Buy 2 for $4,153.60 each and save 6%
  • Buy 10 for $4,022.70 each and save 8%
Availability: 3 weeks
i
Shipping
(CPT)
Need a Quote?
i

The E-4™ wireline pressure setting assembly (W.L.P.S.A.) is a device in which the products of combustion are utilized for the gradual development of force through pressure. This motive force operates the various working parts of the W.L.P.S.A. in a proper sequence to ensure the successful setting of Baker Hughes bridge plugs, retainer production packers, cement retainers, and other products.

The pressure required is built up through a slow-set power charge, (Product Family No. H43766), or a standard power charge, (Product Family No. H43764). For specifics on all power charges and igniters refer to Slow-Set Power C]harge, Standard Power C]harge, Secondary Igniter, BP-3S and BP-4S Igniter, (Product Family Nos. H43766, H43764, H43743, H43744) Unit No. 4190 under Service Tools/Remedial Systems or contact a Baker Hughes representative. The setting pressure is confined to the proper area of the setting tool through the use of O-ring seals. It is of critical importance that all O-rings be maintained in perfect condition and replaced after each use.

The E-4 wireline pressure setting assembly incorporates a piercing disk bleeder system to provide a safe, easy method of bleeding off trapped pressure before disassembling the W.L.P.S.A. after it has been run.

Size 10 Firing Head (Material No. H437201000) is not included in 10 WLPSA

We have a limited supply of refurbished E4 setting tools available. Each of these tools has been fully inspected as follows:

  • All parts are visually and dimensionally inspected
  • Non Destructive Examination Inspection (NDE) is performed on all parts
    • Magnetic Particle Testing (QP100-001)
    • Surface Inspection
    • Thread Inspection and Repair
  • All parts that passed the (NDE) inspection are sent out for rework to minimize any minor imperfections.
  • All parts have a QPQ (BMS-A404) Liquid Salt Bath providing superior wear resistance and improve strength.

Certificate of Compliance utilizing these parts will be issued stating that the Product meets all requirements, standards and or specification set forth by Baker Hughes.

E-4™ wireline pressure setting assembly (W.L.P.S.A.) is a device in which the products of combustion are utilized for the gradual development of force through pressure. This motive force operates the various working parts of the W.L.P.S.A. in a proper sequence to ensure the successful setting of Baker Hughes bridge plugs, retainer production packers, cement retainers, and other products.

The pressure required is built up through a slow-set power charge, (Product Family No. H43766), or a standard power charge, (Product Family No. H43764). For specifics on all power charges and igniters refer to Slow-Set Power C]harge, Standard Power C]harge, Secondary Igniter, BP-3S and BP-4S Igniter, (Product Family Nos. H43766, H43764, H43743, H43744) Unit No. 4190 under Service Tools/Remedial Systems or contact a Baker Hughes representative. The setting pressure is confined to the proper area of the setting tool through the use of O-ring seals. It is of critical importance that all O-rings be maintained in perfect condition and replaced after each use.

The E-4 wireline pressure setting assembly incorporates a piercing disk bleeder system to provide a safe, easy method of bleeding off trapped pressure before disassembling the W.L.P.S.A. after it has been run.

Size 10 Firing Head (Material No. (H437201000) is not included in 10 WLPSA"

  • Used to set Baker Hughes bridge plugs, cement retainers, and production packers on electric wireline
  • Used in conjunction with a casing collar locator for correlation of exact setting depth
  • Used in conjunction with a casing collar locator for correlation of exact setting depth
  • Uses the advantage of the fast running capability of wireline
  • Proven design has been the "Industry Standard" for many years
  • Sizes available for setting inside 2-3/8" tubing up to the largest casing
  • Incorporates a disk bleeder valve to ensure safe and simple pressure bleed-off
  • 450 deg. F [232 deg. C] temperature rating
  • 25000 psi pressure rating
Write Your Own Review
You're reviewing:Size 10 E-4 Wireline Pressure Setting Assembly - REFURBISHED

We're standing by to answer your questions.

Contact Us

Need Help? Take a look at our Frequently Asked Questions (FAQ)

Help