1 3/8 in (34.9 mm) Motorized Free Point Assembly
From $29,455.69
To $40,426.19
Details
The Motorized Free Point indicator is an electromechanical assembly designed to measure torque or stretch in harsh conditions. The basic Motorized Free Point Indicator assembly consists of a non-grounded collar locator (AS40092), upper motorized anchor (FUA), sensor section (AS40018), and lower motorized anchor (FLA) to determine stuck point. A classic Free Point tool assembly typically consists of sinker bars to overcome the holding ability of the pre-set anchors and a slack joint to relieve weight above the tool assembly when at the correct depth for making a measurement. By replacing the bow spring or magnetic anchors with motorized anchors, the Motorized Free Point Indicator in many cases eliminates the need for sinker bars and a slack joint.
Features/Benefits
- Less friction/drag, easier to maneuver into high angle and horizontal wells
- Controllable anchoring force downhole instead of setting constant force before the run, as with springs
- Faster setup time, shorter tool string
- Simple maintenance, can be redressed at wellsite
- Crossovers to various service company connections available
- Does not require extra force to pass restrictions
- In many cases, eliminates the need for a slack joint or sinker bars
- Four arm system provides optimal deployment in horizontal wells
- Shear pins allow for retrieval if communication to deployed tool is lost
Specifications
Tool diameter: (O.D.) 1.375 in (34.92 mm)
Tool length: 9.27 ft (2.83 m)
Tool weight: 35 lbs (16 kg)
Temperature rating: ** 350°F (177°C)
Pressure rating: 21,000 Psi (145 MPa)
Top connection: GO Type Box (Female)
Related products
The FPIP001 is the portable panel, used to power, monitor and control the Free Point Sensor, Moto..
Cone & Washer and Clamp Ring style cable heads designed for various line sizes, diameters, f..
The Motorized Free Point Indicator measures torque and stretch to locate where drill pipe, tubing o..
Contact kit for the GO type male (1 3/16-12 un) to a GO BTN type female (1 3/16-12 un) firing head.
Grounded passive (shooting) CCL to detect casing collars and perforations in tubing or casing.
Firing heads are used to connect tools with Baker # 10 or Baker # 20 firing head field joints to ..
Sinker bars are added to the tool string to provide the weight required to overcome friction and ..
The bow spring centralizes the free point tool string in drill pipe, casing and tubing allows for..