Optimized Rotational Density Maintenance Kits

$42.10
In stock
SKU
KITSORA
Availability: 6-12 weeks
i
Need a Quote?
i
Optimized Rotational Density (ORA) Maintenance Kits

Maintenance Information
Please choose the tool size and level of maintenance required.

Service Schedule is based on circulating hours and is listed below. Depending on drilling conditions, times can vary.
-Level 1: 0 to 249 circulating hours
-Level 2: 250 and 499 circulating hours
-Level 3: 500 circulating hours

Maintenance Kit Details

6.75" Level 1 (10484846)

  • (1) Source Peek Window (10093107)
  • (1) Source-Retention Insert (10144213)
  • (1) Retainer-Source Insert (10144216)
  • (4) Bolt, .312-24 UNJF (N52423-001)
  • (1) Cap Thread Insert (N52953-001)
  • (1) Axial Seal Ring (N900005259)
  • (1) O-Ring, 247 (N912000094)
  • (1) Stop Ring (N917600075)

6.75"Level 2 (10484847)
  • (1) Source Peek Window (10093107)
  • (1) Source-Retention Insert (10144213)
  • (1) Retainer-Source Insert (10144216)
  • (4) Bolt, .312-24 UNJF (N52423-001)
  • (1) Cap Thread Insert (N52953-001)
  • (2) Temp Label (N65477-002)
  • (3) O-Ring, 152 (N67746-152)
  • (1) Telatemp Tape (N85996)
  • (3) O-Ring, 280 (N87032-280)
  • (1) O-Ring, 224 (N900001252)
  • (1) Axial Seal Ring (N900005259)
  • (1) O-Ring, 225 (N910600082)
  • (1) O-Ring, 247 (N912000094)
  • (1) O-Ring, 152 (N97982-152)
  • (1) O-Ring, 158 (N97982-158)

8.25" Level 1 (10484850)
  • (1) Axial Seal Ring (10084612)
  • (1) O-Ring, 357 (N97982-357)

8.25" Level 2 (10484851)
  • (1) Axial Seal Ring (10084612)
  • (1) Guide Ring (10086671)
  • (1) Stop Ring (10125810)
  • (1) Contact Insert (10148683)
  • (1) FeedThru Assembly (10148834)
  • (2) O-Ring 372 (N006210868)
  • (2) Modular Ring (N53486-303)
  • (1) Temp Label (N65477-002)
  • (2) O-Ring, 152 (N67746-152)
  • (1) O-Ring, 028 (N728-500-079)
  • (1) O-Ring, 027 (N728-500-124)
  • (66) Hex Screw, .312-24x.837 (N75991-098)
  • (1) Telatemp Tape (N85996)
  • (1) O-Ring, 263 (N87032-263)
  • (3) O-Ring, 280 (N87032-280)
  • (1) O-Ring, 178 (N900000215)
  • (8) Pan Screw, #4-48x1/4 (N95969-013)
  • (1) O-Ring, 158 (N97982-158)
  • (1) O-Ring, 357 (N97982-357)

Tool Description
The LithoTrak service provides Azimuthal Sectored Density Images, as well as Photoelectric and Caliper measurements while drilling. Each data point is tied to a corresponding Caliper measurement to ensure accurate density evaluation with minimal stand-off effect. Caliper measurements are used also for neutron porosity borehole environmental compensation and give an accurate borehole profile for borehole volumes or wellbore stability applications.

LithoTrak service is delivered using downhole hardware consisting of: Caliper Corrected Neutron Sub, Optimized Rotational Density Sub, Slim-hole Density Neutron Sub and Caliper Measurements / Acoustic Stand - Off.

The Optimized Rotational Density tool is designed to focus gamma rays into the formation. They interact with the formation in front of two Detectors, positioned at fixed distances from the Source. The two Detectors, designated long spaced and short spaced, are used to compensate the presence of drilling fluid between the tool and borehole wall.

Write Your Own Review
You're reviewing:Optimized Rotational Density Maintenance Kits

We're standing by to answer your questions.

Contact Us

Need Help? Take a look at our Frequently Asked Questions (FAQ)

Help