2-3/8" Wireline Entry Guide, Half Muleshoe
The Bakerline™ series wireline entry guide is designed to be run on the bottom of the tubing string, aiding in the re-entry of wireline tools into the tubing.
The shear-out ball-seat sub can be furnished in a box x-pin configuration for applications where it is necessary to run additional tubing or completion equipment below the shear-out ball-seat sub. When the ball and ball seat are used, they are expelled during operation, so it is necessary to ensure they will safely pass through all equipment located below them.
- Wireline entry guide’s single piece construction increases ruggedness
- Located at the end of a tubing string provides assurance that wireline tools may re-enter the tubing string without hanging up
- Longer shear screws allow pretesting at ambient temperature prior to running the tool,Back-up O-ring ensures seal integrity
Tool Name: Wireline Entry Guide
Tool OD: 3.094 inch
Tool ID: 1.931 inch
Connection: 4.70 LB/FT EU 8RD
Actual product may vary from the image shown.
Download the product brochure here.